... | @@ -3,8 +3,15 @@ |
... | @@ -3,8 +3,15 @@ |
|
- **DO NOT ATTEMPT ANY MAINTENANCE OPERATIONS BY YOURSELF**
|
|
- **DO NOT ATTEMPT ANY MAINTENANCE OPERATIONS BY YOURSELF**
|
|
- **if you suspect the machine might not be operating at 100% - call tech support**
|
|
- **if you suspect the machine might not be operating at 100% - call tech support**
|
|
- **NEVER EVER LEAVE MACHINE UNATTENDED DURING OPERATION. NOT EVEN FOR 5 SECONDS.**
|
|
- **NEVER EVER LEAVE MACHINE UNATTENDED DURING OPERATION. NOT EVEN FOR 5 SECONDS.**
|
|
- only use materials provided by the department. if you do absolutely need to use your own materials - you absolutely must check with technician first
|
|
- only use materials provided by the department. if you do absolutely have to use your own materials - you absolutely must check with technician first
|
|
|
|
- AIR EXHAUST & AIR ASSIST MUST BE ON DURING LASER OPERATION
|
|
|
|
|
|
|
|
# IN CASE OF FIRE
|
|
|
|
- hit the EMERGENCY STOP button
|
|
|
|
- SHOUT FOR HELP
|
|
|
|
- shut down air assist and air exhaust
|
|
|
|
- open the laser and if possible - remove the burning piece from the machine onto the concrete workshop floor
|
|
|
|
- either stomp out the fire or use the CO2 fire extinguisher located next to the machine
|
|
|
|
|
|
## MACHINE SPECS:
|
|
## MACHINE SPECS:
|
|
|
|
|
... | @@ -17,4 +24,10 @@ |
... | @@ -17,4 +24,10 @@ |
|
|
|
|
|
- original manual: https://www.epiloglaser.com/assets/downloads/manuals/fusion-manual-web.pdf
|
|
- original manual: https://www.epiloglaser.com/assets/downloads/manuals/fusion-manual-web.pdf
|
|
- cheesy promo video, but worth your 4 minutes to get a basic idea of the machine you're dealing with: https://youtu.be/1bS3adFjneI
|
|
- cheesy promo video, but worth your 4 minutes to get a basic idea of the machine you're dealing with: https://youtu.be/1bS3adFjneI
|
|
- long, 35-min video, but again, very well worth your time: https://youtu.be/jidFXIG2IwQ |
|
- long, 35-min video, but again, very well worth your time: https://youtu.be/jidFXIG2IwQ
|
|
\ No newline at end of file |
|
|
|
|
|
## Epilog-suggested feeds&speeds:
|
|
|
|
- cutting 3mm acrylic: 10s 100p
|
|
|
|
- cutting 6mm acrylic: 3s 100p
|
|
|
|
- cutting 10mm acrylic: 1s 100p
|
|
|
|
|