Commit 95315f9c authored by Evan Raskob's avatar Evan Raskob

Add README.md

parent 581fe571
# Example of OSC and HUZZAH32 and ESP32 Boards
## Installation
* Make sure [OSC](https://github.com/CNMAT/OSC) is installed for Arduino. Download the ZIP archive, then go to Sketch->Include Library->Add .ZIP File
* Make sure your ESP32 boards are installed via the instructions
* Overview: https://learn.adafruit.com/adafruit-huzzah32-esp32-feather/using-with-arduino-ide
* Specific [steps for Boards Manager](https://github.com/espressif/arduino-esp32/blob/master/docs/arduino-ide/boards_manager.md)
* Get your wifi access point name and password handy. You'll need to put then in the top of the Arduino sketch
* For the test client, make sure Processing is installed and install the **p5osc** library (from the manager)
Then, just plug your HUZZAH32 in and run the Processing sketch! When you click the mouse in the black P5 sketch window, the built-in red light on the board should light up. When you type any key, it should turn off. Check the Arduino serial monitor for some output.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment